Tool-Less Adapter Assembly
This adapter fits on 30mm OD glass flanges. The other side is 1/2" MNPT to connect to various fittings for attaching hoses and like items.
1/4" Gum Rubber Tubing
Pure gum rubber tubing is tear-resistant, ideal for vacuum applications and will not collapse under a vacuum-like other soft/low durometer tubing on the market.
Please refer ...
BVV™ 304 SS Hex Adapter FNPT. For connection of different size/length pipes or to off the end of a pipe. Allows for pipes to be connected in a straight line, increase/decrease flow, change the dire...
The body of the flow sight is 304 stainless steel. The glass sight has a pressure tight, solid gasket design with Viton seals. The unit tolerates temperatures up to 180° F. The maximum recommended ...
KF Connection Braided Stainless Steel Bellow Hose
Built for demanding vacuum systems, this hose combines 304-grade stainless steel construction with a reinforced braided exterior for superior durab...
Gas PTFE Tape
Yellow gas line PTFE Tape is used for hydrocarbon extraction systems and mandatory for any system with solvents. The PTFE tape is a thick threaded sealant that can be used on differen...
KF Flange x Tri-Clamp End Cap Adapter
These 304 stainless steel adapters allow you to adapt from a KF (NW) type flange to a Tri-Clamp sanitary flange. This part can be used for vacuum lines or even...
2 Pack Metal Keck Clips - 34/45
Stainless steel clamps to fit 34/45 standard taper joints. Metal clamps are suitable for high temperatures applications
1/2" 37° JIC Braided Stainless Steel Hose
Professional-grade PTFE braided hose engineered for demanding chemical and high-pressure applications. The combination of a PTFE inner liner and 304 stainl...
Nickel Plated Brass 1/4" NPT Female to 1/4" Barb Fitting allows the user to adapt a male NPT thread to a 1/4" Hose barb for flexible tubing.
Note: This connection requires PTFE tape on the threade...
This tank regulator will control the rate of fluid or gas flow using a butterfly valve. Our BVV butterfly valve is rated to 1000 psi, and is made of 304 stainless steel and features a PTFE valve s...
Sidemount Assembly with washer, O-ring and Hex Nut. This sidemount manifold has a 0-(-30) Vacuum gauge with a 1/4" HVAC flare and a 1/4" FNPT side port.
Bulk Head Long with Valve and Flare
This bulkhead with attached valve is perfect for passing through thin walls in vacuum applications such as vacuum chambers, the maximum recommended wall thicknes...
Block Manifold with 8 - 1/2" FNPT ports
This Manifold has 8x 1/2" FNPT ports that are commonly used for connecting multiple columns or different tanks to one input of vacuum and/or nitrogen. It has...
Mastercool 1/4" FNPT Vacuum Pump Exhaust Adapter
This fitting allows the user to connect a 1/4" NPT fitting to the exhaust for the desired application such as a carbon exhaust filter. It is made of...
HVAC Vacuum Pump Hose with Swivel Fittings
This Best Value Vacs 5' HVAC Hose has 1/4" swivel fittings on each end. HVAC hoses are built for long life and dependability. A strong, six-sided crimp pr...
Glycerin Filled Compound Gauge with 1/4" NPT Back Mount
BVV™ Glycerin filled compound gauge has a 1/4" MNPT stainless steel connection with a readout of (-30) -250 PSI.
BVV™ Compound Gauge - TDS
Glycerin Filled Compound Gauge with 1/4" NPT Base - (-30)-250 PSI
BVV™ Glycerin filled compound gauge has a 1/4" MNPT stainless steel connection with a readout of (-30)-250 PSI. Use a compound g...
BVV™ Hose Barb x MNPT Elbow
BVV™ brand stainless steel parts are made with precision 304 Grade Stainless Steel and are clean and free from burrs or debris. These fittings are Elbows with Hose Barb ...
KF Flange x FNPT Adapter
KF- or NW Vacuum fittings are designed for Ultra-High-Vacuum applications and are made out of 304 stainless steel. These fittings require a special gasket with metal center...
SILCON® Silicone Tubing
(**Note: This tubing is only for flow and is NOT vacuum rated)
The most outstanding properties of SILCON tubing are its flexibility and resistance to temperature extremes....
1/4" 316SS Hard Line Tubing – 5FT
Premium 316 stainless steel hard line tubing engineered for high-pressure compression fitting applications. This 5-foot length meets ASTM A-269 standards and deliv...
KF-25 x Barb Adapter
This 304 Stainless Steel KF-25 adapter is fitted with a 304 stainless hose barb adapter to connect a vacuum pump or vacuum oven to a flexible rubber hose.
1" ID Heavy Wall Spiral Wire Reinforced Clear PVC Vacuum Hose
Crystal clear Phthalate Free PVC compound, formulated with ingredients in compliance with applicable FDA requirements, meets USDA, 3A, ...
Tri-Clamp / Tri Clover Top cap with Valve and 1/4" 37 Degree JIC Flare (Nitrogen Tested)
Pre-installed 1/4" 37 Degree JIC Flare and 304 stainless steel ball valve on a Tri-Clamp endcap. These endca...
High-Temp GL to Stainless Steel Tube Stub
High-Temp GL to Stainless Steel Tube Stub allows the user to connect a compression fitting or flexible tubing to the adapter and withstand higher temperatu...
3/8" Fractional Tube Fitting Hose
These chemically resistant PTFE braided hoses are a necessity when dealing with harsh chemicals or solvents and high-pressure applications. They provide a uniquely...
NPT Stainless Steel Thermowell
These stainless steel thermowells are the perfect addition to an extraction system allowing the user to probe the internal temperate of a system component to know wha...
1/2" Gum Rubber Tubing
Pure gum rubber tubing is ideal for vacuum applications and will not collapse under a vacuum like other soft/low durometer tubing on the market.
Please refer to this chemical...
37° Female JIC X MNPT
BVV brand stainless steel parts are made with precision 304 Grade Stainless Steel and are clean and free from burrs or debris. These fittings are 37° JIC threads and NPT threa...
3/8" Gum Rubber Tubing for Vacuum Applications
Premium pure gum rubber tubing engineered for demanding vacuum system applications. This formulation resists collapse under vacuum conditions, deliver...
Female Elbow
BVV™ brand stainless steel parts are made with precision 304 Grade Stainless Steel and are clean and free from burrs or debris. These fittings are NPT threads (National Pipe Taper) and...
37° MJIC Tee
BVV™ brand stainless steel parts are made with precision 304 Grade Stainless Steel and are clean and free from burrs or debris. These fittings are 37° JIC threads and will create a sea...
1.5" Tri-Clamp Stainless Steel Braided Hose with Convoluted PTFE Liner
This premium industrial hose assembly delivers superior performance in chemical processing and high-pressure fluid transfer ap...
KF Hand Needle Valve
This 90 degree valve has a KF (NW) High Vacuum Flange to adapt to any other KF type pump or manifold if needed. Sizes available include KF16, KF25, KF40, and KF50. It is made o...
37° MJIC Union
BVV™ brand stainless steel parts are made with precision 304 Grade Stainless Steel and are clean and free from burrs or debris. These fittings are 37° JIC threads and will create a s...
FNPT Cap
Best Value Vacs brand stainless steel parts are made with precision 304 Grade Stainless Steel and are clean and free from burrs or debris. These fittings are NPT threads (National Pipe Tap...
