FKM Viton Tri-Clamp Gaskets
Fluoroelastomer (FKM) gaskets are a great option for using higher temperatures in a closed-loop system or other steps of the extraction process including filtration and ...
Flat Tri-Clamp/Tri-Clover Reducers
Flat Tri-Clamp reducers enable seamless connections between different sized Tri-Clamp components while maintaining a compact footprint in your extraction system. ...
Tri-Clamp Sight Glass - Long
These tall sight glasses are a great additions closed-loop extraction system to view the liquefied solvent flowing through your system and see the color before the purg...
PTFE Envelope Tri-Clamp/Tri-Clover Gaskets with Viton Filler
PTFE Envelope Tri-Clamp Gaskets are the only choice when needing extreme chemical resistance and temperature range. These gaskets are ex...
12" x 12" Hemi Lid with Coil V2
This 12" Hemi Lid has a built in coil that can be used with a heated circulator to assist with internal temperature control during the recovery process. This hemi li...
316L Dutch Weave Sintered Filter Disk
**Note: This product comes with Filter Disk and Gasket ONLY. Filter Plate and Spool are NOT included. Recommended Filter plate click here.
These 316L stainle...
10" x (3) 1.5" x (2)1/4" FNPT Tri-clamp/ Tri Clover Endcap
This End Cap come with Two 1/4"-18 FNPT Threaded connection and Three 1.5" Tri-Clamp ferrule welded to the end cap with a sanitary weld w...
Fully Jacketed Containers
Fully jacketed containers are designed to be used as collection pots or collection traps in an extraction system and they allow the circulation of temperature control flui...
6" Tri-Clamp/Tri-Clover Tall Sight Glass
This massive 6" Tri-Clamp sight glass is one of a kind and a specialty product for Best Value Vacs. It allows customers to attach it to alcohol or steam-bas...
Tri-Clamp / Tri Clover Top cap with Valve and 1/4" 37 Degree JIC Flare (Nitrogen Tested)
Pre-installed 1/4" 37 Degree JIC Flare and 304 stainless steel ball valve on a Tri-Clamp endcap. These endca...
316L Dutch Weave Sintered Filter Disk
**Note: This product comes with Filter Disk and Gasket ONLY. Filter Plate and Spool are NOT included. Recommended Filter plate click here.
These 316L stainle...
1.5" Tri-clamp Thermometer
High-quality adjustable stainless dial 1.5" Tri-clamp thermometer with back mount orientation. This thermometer is perfect for process temperature monitoring in sanitary ...
Brass Nuts for High Pressure clamps
These are replacement nuts for High Pressure clamps and are made of brass and have a 5/8" Hex with a 3/8"-16 Threading. After repeated usage nuts on high pressu...
Distribution Plate - 6"
The 6" distribution plate is designed to be placed above a tube in shell heat exchanger to help evenly distribute liquid around the heat exchanger. It has a borosilicate s...
8" X (3) 1.5" X (2) 1/4" FNPT Tri-Clamp Tri Clover Endcap
This End Cap come with Two 1/4"-18 FNPT Threaded connection and Three 1.5" Tri-Clamp ferrules welded to the end cap with a sanitary weld w...
Hemispherical Endcap with 1.5" Side Port
This Hemispherical Endcap has a unique drain port welded on to the side of it to easily clear out any material without having to have multiple extra clamps,...
Tri-Clamp Single Hinge Clamp
The BVV Tri-Clamp Single Hinge Clamp is engineered for sanitary process applications requiring reliable, repeatable connections. Constructed from 304 stainless steel wi...
Bolt Kit For High-Pressure Clamps
When high-pressure clamp bolts are used frequently the threads will wear down eventually causing the bolt to fail. User's need to replace their high-pressure bolts...
Solid Tri-Clamp/ Tri Clover End Caps
Best Value Vacs Brand Solid Tri-Clamp End Caps provide the user with the option to cap off a spool or lid or for custom fabrication.
Specifications:
Material...
Baffled Condenser - 6" x 36" with 1.5" Tri-Clamp Side Ports
This 304 Stainless Steel Tri-Clamp condenser allows the user to condense hot vapors and solvent while running an extraction system or use...
Bottom Weld Stainless Steel Tri-Clamp / Tri Clover Filter Plate
Bottom Weld Stainless steel filter plates offer the user a great solid platform to help with filtration during the extraction process...
Bolts For High Pressure Clamps
When high pressure clamp bolts are used frequently the threads will wear down eventually causing the bolt to fail. User's need to replace their high pressure bolts at...
6" Jacketed Hemispherical Reducer Compression
This hemispherical reducer will go from a 6" tri clamp to a 1/2" Compression fitting. The compression fitting is the preferred choice for sanitary conn...
1.5" Tri-Clamp Stainless Steel Braided Hose with Convoluted PTFE Liner
This premium industrial hose assembly delivers superior performance in chemical processing and high-pressure fluid transfer ap...
Pre-Cut Stainless Steel Mesh for Tri-Clamp/Tri-Clover Filter Plates 100 Mesh (150 Micron)
These Stainless Steel Mesh are pre-cut for convenience to fit inside Tri-Clamp filter plates or spools. The...
BVV Neoprene Insulation Sleeve's
Our Insulation sleeves are made from 3mm durable Neoprene Scuba Fabric and has a rated insulation value of R 1.5
These sleeves are 90% polyester and 10% spandex whi...
Tef-Flex Sanitary Tri-Clamp Gasket
Tef-Flex: A Tef-Flex sanitary gasket’s contact surface is a layer of PTFE grafted to an EPDM rubber inner core. This totally bonded construction provides an excep...
Tri-Clamp/ Tri Clover Top cap with Valve and 1/4" Barb
Pre-installed 1/4" hose barb (Fits 1/4" ID Hoses) and 304 stainless steel ball valve on a Tri-Clamp endcap. These endcaps and valves and nitro...
1.5" Fully Jacketed Tri-Clamp/ Tri Clover x 8" 90 Degree Bend
This 1.5" Fully Jacketed Triclamp/ Tri Clover 90 Degree bend is extended out to 8" end to end to add extra length to the fitting. It i...
This is a sanitary spool that is sure to make a great connection. This product is sure to prevent leaking and is extremely easy to clean. 1.5" Triclamp / Tri Clover x 3" x 1/2" Male NPT x 1/4" Male...
This column can be used as a collection or solvent vessel for a larger rack mounted extractor. The top and bottom tri clamp size are 6" to allow for a higher pressure rating on the entire vessel. T...
12" Tri-Clamp/ Tri Clover x (3) 2" Tri-Clamp x (4) 1/4" FNPT Hemispherical Lid
This End Cap comes with Four 1/4"-18 FNPT Threaded connection and Three 2" Tri-Clamp ferrules welded to the end cap wi...
6" Tri-Clamp Endcap w/ (4) 1/4" FNPT Ports
These End Caps come with four 1/4"-18 FNPT Threaded connections welded to the end cap with a sanitary weld. They allow the user to adapt and connect a thr...
1" MNPT x Tri-Clamp / Tri Clover End Caps
These tri-clamp end caps:
Have a 1" Male NPT connection
Come in either 1.5", 2", 3", 4", 6" tri-clamp sizes
Are made of 304 stainless steel
Stacking Filter Plate Ring KIT
This Stacking Filter Plate and Ring Kit allows the user to stack multiple levels of filtration while having the rigidity of a solid filter plate. These components are...
Replacement Ferrule For Borosilicate Tri-Clamp / Tri Clover Sight Glasses
This is a replacement Ferrule for a BVV™ and Neocision Borosilicate Tri-Clamp / Tri Clover Sight Glasses
Tri-Clamp Quadpod
Quadpods provide an excellent solution to holding any Tri-Clamp spool vertically. From closed columns to open blast extraction units, Quadpods are designed to fit over Pyrex dishe...
6" Tri-Clamp Tri Clamp Endcap X (2) 1/4" FNPT Ports
This 6" Triclamp endcap has 2x 1/4" FNPT ports welded to the top of the endcap allowing for several variations of connections that can customize ...
